Bemer PRO SET Handbuch Seite 125

Changing the battery of the B.SCAN
>> Remove both screws (see Fig. 1).
>> Now carefully remove the back panel.
>> Now slide the old battery sideways
(in the direction of the arrow) away
from its holder (see Fig. 2).
>> Now slide the new battery
(type CR 2032) into the holder.
Please note the "+ pole" battery
symbol (see Fig. 2).
>> Now place the back panel back on the
device and screw it back together.
magyar magyar français français english
eNGLIsh
1
2
deutsch
deutsch
125