B.scan - Bemer PRO SET Handbuch

B.SCAN

The B.SCAN is integrated in your B.BOX and is designed
to check your BEMER devices along with safety precau-
tions for their proper function. The B.SCAN makes the
multidimensional BEMER Signal configuration audible
and is therefore also ideally suitable as an effective dis-
play demonstration tool for interested persons.
124
: : b.scan
The device is switched on by pressing the button once; pressing and holding down
the button (for several seconds) will switch off the device. If no Signal system is
detected, the B.SCAN automatically switches off after 10 seconds.