Light therapy
>> Designate the application module [A1 / A2],
by repeatedly pressing the [SET] key.
>> Select the desired light intensity by selecting
a number [1] through [10].
>> Start the program with [START / STOP].
example – using light therapy (B.LIGHT connected on port A2)
Usually high intensity levels are
recommended. However for
those with very sensitive skin,
lower intensity levels can also
be selected.
magyar
magyar
français
français
english
eNGLIsh
Do not let the LED light shine
directly in the eyes. Use the
provided protective goggles!
deutsch
deutsch
107