Transport, Packaging And Storage; Transport; Packaging And Storage - WIKA CPP7000-X Bedienungsanleitung

5. Transport, packaging and storage

5. Transport, packaging and storage
5.1

Transport

Check the comparison test pump model CPP7000-X
by transport.
Obvious damage must be reported immediately.
CAUTION!
Damage through improper transport
With improper transport, a high level of damage to property can occur.
When unloading packed goods upon delivery as well as during internal

transport, proceed carefully and observe the symbols on the packaging.
With internal transport, observe the instructions in chapter 5.2

and
If the instrument is transported from a cold into a warm environment, the formation of condensation
may result in instrument malfunction. Before putting it back into operation, wait for the instrument
temperature and the room temperature to equalise.
5.2

Packaging and storage

Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport (e.g. change in installation
site, sending for repair).
Permissible conditions at the place of storage:
Storage temperature: 15 ... 35 °C
■
Humidity: 35 ... 85 % relative humidity (no condensation)
■
Avoid exposure to the following factors:
Direct sunlight or proximity to hot objects
■
Mechanical vibration, mechanical shock (putting it down hard)
■
Soot, vapour, dust and corrosive gases
■
Hazardous environments, flammable atmospheres
■
WIKA Operating Instruction, model CPP7000-X
storage.
for any damage that may have been caused
EN
Packaging
13