Reconfiguring The Dtv Channel Settings; Reselecting A Country; Replacing The Existing Channels; Adding New Channels - Pioneer PDP-607XD Bedienungsanleitung

Enjoying DTV broadcasts
09

Reconfiguring the DTV channel settings

This section describes how to reconfigure the DTV channel
settings after setting up DTV channels using Auto Installation
(page 29). You can select "DTV Setup" only when watching DTV
channels.

Reselecting a country

1
Press HOME MENU.
2
Select "Setup" ( /
3
Select "DTV Setup" ( /
4
Select "Installation" ( /
• The password entry screen appears. Enter your 4-digit
password using buttons 0 to 9.
5
Select "Country" ( / ).
6
Select a country ( / ).
Installation
Aerial Power
Country
Add New Channels
Replace Existing Channels
Signal Check
Restore System Defaults
NOTE
• The password entry screen does not appear if you have
disabled the password function. For details, see "Using a
password (AV mode only)" on page 56.
• You can select "DTV Setup" only when watching DTV
channels.

Replacing the existing channels

The following procedure discards the current DTV channel
setups and searches for receivable channels to redo the
channel setups.
1
Press HOME MENU.
2
Select "Setup" ( /
3
Select "DTV Setup" ( /
4
Select "Installation" ( /
• The password entry screen appears. Enter your 4-digit
password using buttons 0 to 9.
40
En
then ENTER).
then ENTER).
then ENTER).
Off
Germany
then ENTER).
then ENTER).
then ENTER).
5
Select "Replace Existing Channels" ( /
• The system first erases all channel information and then
starts channel search.
Replace Existing Channels
Search Information
Existing Channels
Channels Found
Progress 30%
• To quit a channel search in progress, press HOME MENU.
NOTE
• To complete "Replace Existing Channels", there must be
more than 1 hour at least left to the next preset recording or
preset Auto Update time.
• The password entry screen does not appear if you have
disabled the password function. For details, see "Using a
password (AV mode only)" on page 56.
• You can select "DTV Setup" only when watching DTV
channels.

Adding new channels

Use the following procedure to search and register new
channels with the current DTV channel setups saved.
1
Press HOME MENU.
2
then ENTER).
Select "Setup" ( /
3
Select "DTV Setup" ( /
4
Select "Installation" ( /
• The password entry screen appears. Enter your 4-digit
password using buttons 0 to 9.
5
Select "Add New Channels" ( /
Installation
Aerial Power
Country
Add New Channels
Replace Existing Channels
Signal Check
Restore System Defaults
• Channel search automatically starts. If any new channel
is found, it is automatically registered on the Plasma
Television.
then ENTER).
Found Channels
04 001
************
20 002
************
003
******
004
************
then ENTER).
then ENTER).
then ENTER).
Off
Germany