Selecting A Screen Size Manually - Pioneer PDP-607XD Bedienungsanleitung

Useful Adjustment Settings
11

Selecting a screen size manually

Press f to switch among the screen size options selectable
for the type of video signals currently received.
• Each time you press f, the selection is switched.
• The selectable screen sizes differ depending on the types of
input signals.
NOTE
• If images with black bands on both sides or top and bottom
of the screen - when using the "4:3", "FULL 14:9", "CINEMA
14:9" or "Dot by Dot" modes, for example - are displayed
continuously for long periods or for shorter periods of time
over several days, image retention may result. It is
recommended that you enjoy watching images displayed in
full screen, except when doing so may result in copyright
infringement.
AV mode
Item Description
4:3
For 4:3 standard pictures. A side mask appears on
each side.
FULL 14:9
For 14:9 squeeze pictures. A thin side mask appears
on each side.
CINEMA 14:9 For 14:9 letterbox pictures. A thin side mask appears
on each side, and you may also see bars on the top
and bottom with some programmes.
WIDE
In this mode the picture is progressively stretched
toward each side of the screen.
FULL For 16:9 squeeze pictures.
ZOOM For 16:9 letterbox pictures. Bars may appear on the
top and bottom with some programmes.
CINEMA For 14:9 letterbox pictures. Bars may appear on the
top and bottom on some programmes.
PC mode except for XGA signals
Item Description
4:3 Fills the screen without altering the input signal
aspect ratio.
FULL Full 16:9 screen display
Dot by Dot Matches input signal with same number of screen
pixels.
PC mode for XGA signals
(Ex. 1024 x 768 input at PDP-607XD/PDP-507XD)
Item Description
4:3 Matches input signal with the same number of
screen pixels.
Optimized for 1024
FULL1 Full 16:9 screen display
Optimized for 1024
FULL2
For wide signal display
Use when displaying 1360
54
En
x
768 display
x
768 display
x
768 signal resolution.
NOTE
• The specifications given for the PC mode is for the PDP-
607XD/PDP-507XD. For the PDP-427XD, the number of panel
pixels is different, and thus signal processing and actual
viewing conditions will vary slightly.
• While watching High Definition TV broadcasting, pressing
f switches among FULL, WIDE, 4:3, and ZOOM.
• Some HD broadcasts may display 4:3 content with side
masks, which may cause uneven wear. After viewing, it is
recommended to view full screen motion video.
AV mode
CINEMA
ZOOM
FULL
PC mode except for XGA signals
Dot by Dot
PC mode for XGA signals
FULL2
4:3
FULL 14:9
CINEMA 14:9
WIDE
4:3
FULL
4:3
FULL1