Installation Of The Unit - Pioneer PDP-502MXE Bedienungsanleitung

Installation of the unit
Installation using the supplied display stand
Be sure to fix the suppJied stand to the instaNation
surface.
Use commercially available M8 bolts that are 25 mm
longer than the thickness of the instaNation surface.
1 Fix the supplied stand to the installation surface at
each of the 4 prepared holes using commercially
available M8 bolts,
Front
Rear
4 Set this unit in the stand.
5 Fix this unit using the supplied washer and bolt.
c
110 mm
2 Insert the supplied washer (large) into the stand.
Use a 6 mm hex wrench
to bolt them.
3 Take off the hole rwets _,, and _,, of this umt using
a screwdriver or a coin.
II o
_k CAUTION
Because this unit weighs about 40 kg and has littEedepth making
it unstaMe, pEeaseuse 2 peopEeor more when packing, carrying
or installing.
ii °
I1o
8
Erl