Herunterladen Diese Seite drucken

Air Fi Lter; Filtro Aria - Betamotor RR 50 CC ENDURO Anleitung

Werbung

FILTRO ARIA

Per accedere al fi ltro è ne-
cessario smontare:
- La sella svitando la vite
A posta sopra la sella e
sfi lando la sella nel verso
B come indicato in fi gu-
ra, quindi procedere nel
modo seguente:
- Estrarre il coperchio
- Togliere il fi ltro svitando la
vite E
- Lavarlo con acqua fredda
e sapone
- Asciugarlo
- Bagnarlo con olio per fi ltri,
eliminandone poi l'ecce-
denza in modo che non
goccioli; si consiglia di
cospargere di grasso la
parete di contatto con la
scatola fi ltro
- Se necessario pulire an-
che l'interno della scatola
fi ltro
- Procedere al rimontaggio,
eseguendo le operazioni
in senso inverso.
AIR FILTER
A
To access the fi lter you must
remove:
- The saddle by unscrewing
screw A on the saddle top
and pushing the saddle
in direction B as shown in
the fi gure. After that, follow
these steps:
- Remove the cover.
B
- Remove screw E and pull
out the fi lter.
- Wash it with soap and cold
water.
- Dry the fi lter
- Wet the fi lter with fi lter oil,
removing any excess oil so
that there is no dripping;
we suggest to grease the
side that touches the fi lter
box
- If necessary, proceding in
the reverse order
- Reassemble proceding in
the reverse order.
E
3
47

Werbung

loading

Diese Anleitung auch für:

Rr 50 cc motardRr 50 cc racingRr 50 cc trackRr 50 cc enduro std