Herunterladen Diese Seite drucken

Werbung

CANDELA
Mantenere la candela in buono stato contribuisce alla
diminuzione dei consumi e all'ottimale funzionamento
del motore.
Per effettuare il controllo è suffi ciente sfi lare la pipetta
della corrente e svitare la candela.
Esaminare con uno spessimetro la distanza fra gli
elettrodi che dovrà essere di 0,5-0,6 mm, nel caso non
corrisponda a questo valore è possibile correggerla
piegando l'elettrodo di massa.
Verifi care inoltre che non presenti screpolature sull'iso-
lante o elettrodi corrosi, in questi casi procedere all'im-
mediata sostituzione.
Effettuare il controllo attenendosi alla tabella a pag. 54.
Per il montaggio della candela è consigliabile avvitarla
a mano fi no a battuta, quindi bloccarla con la chiave.
Nota:
• L'utilizzo di olii di bassa qualità determina l'aumento
dei depositi carboniosi, è quindi consigliabile utilizzare
un olio di buona qualità.
• Si raccomanda di utilizzare sempre candele
NGK BR9 ES.

SPARK PLUG

Keeping the spark plug in good condition will reduce
fuel consumption and increase engine performance.
To perform the check, simply slide off the electrical con-
nection tube and unscrew the spark plug.
Examine the distance between the electrodes with a
feeler. This distance should be from 0.5 to 0.6 mm. If it is
not, it may be corrected by bending the earth electrode.
Check as well that there are no cracks in the insulation
or corroded electrodes. If so, replace immediately.
Observe the chart on page 55 when performing the
check.
When replacing the spark plug, screw it in by hand until
it stops, then tighten with a wrench.
Note:
• The use of low-quality oil will cause an increase in
carbon deposits. We therefore advise the use of a
qualitatively good oil.
• Always use NGK BR9 ES spark plugs.
3
49

Werbung

loading

Diese Anleitung auch für:

Rr 50 cc motardRr 50 cc racingRr 50 cc trackRr 50 cc enduro std