Herunterladen Diese Seite drucken

Front Brake; Freno Anteriore - Betamotor RR 50 CC ENDURO Anleitung

Werbung

FRENO ANTERIORE

3
Controllo
Per verificare lo stato di
usura del freno anteriore è
suffi ciente visionare la pinza
dalla parte inferiore, dove
è possibile intravedere le
estremità delle due pastiglie
che dovranno presentare
almeno uno strato di 2 mm
di ferodo.
Nel caso lo strato fosse infe-
riore procedere immediata-
mente alla loro sostituzione.
Nota:
Effettuare il controllo ogni
2500 km.
Per la sostituzione contattare
un nostro concessionario
autorizzato.
50
2 mm
Per la sostituzione delle pastiglie freni consiglia-
mo di rivolgersi al proprio rivenditore.
We suggest to contact your dealer to replace
the pads.

FRONT BRAKE

Check
To check the wear of the front
brake pads, visually inspect
the caliper from below. The
lining on the visible ends of
the two brake pads should
be at least 2 mm thick.
If this layer is thinner than 2
mm, replace the pads im-
mediately.
Note:
Check the brakes every 2.500
km/1.500 miles.
For the sobstitution contact
our dealers.

Werbung

loading

Diese Anleitung auch für:

Rr 50 cc motardRr 50 cc racingRr 50 cc trackRr 50 cc enduro std