Acoustic Signals; Options - Electrolux GA45GLVCN Benutzerinformation

10 www.electrolux.com
• The indicators
• The indicator
• The display shows the current
3. Press
= rinse aid dispenser activated.
4. Press the on/off button to confirm the
setting.
5. Adjust the dosage of rinse aid.
6. Fill the rinse aid dispenser.

6.4 Acoustic signals

Acoustic signals sound when a
malfunction of the appliance occurs and
when you set the level of the water
softener. It is not possible to deactivate
these acoustic signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to activate
it.
How to activate the acoustic
signal for the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
flash and the display is blank.
2. Press
• The indicators

7. OPTIONS

and
continues to flash.
setting: = rinse aid dispenser
deactivated.
to change the setting.
, and
.
and
Desired options must be
activated every time before
you start a programme
(except for Multitab). It is not
possible to activate or
deactivate options while a
programme is running.
go off.
3. Press
4. Press the on/off button to confirm the
6.5 MyFavourite
With this option you can set and save the
programme that you use more frequently.
You can only save 1 programme. A new
setting cancels the previous one.
How to save the MyFavourite
programme
1. Set the programme that you want to
You can also set applicable options
together with the programme.
2. Press and hold
How to set the MyFavourite
programme
Press
and until
start to
go off.
7.1 Multitab
Activate this option when you use multi-
tablets that integrate the salt, rinse aid and
detergent functions. They can also contain
other cleaning or rinsing agents.
This option deactivates the release of salt
and rinse aid from the respective
containers. The salt and rinse aid
indicators do not come on.
• The indicator
flash.
• The display shows the current
setting: = Acoustic signal off.
to change the setting.
= Acoustic signal on.
setting.
save
indicator comes on with fixed light.
.
• The MyFavourite indicator comes
on.
• The display shows the number and
the duration of the programme.
• If options have been saved
together with the programme, the
indicators related to the options
come on.
continues to
until the related