Parameter Data - Balluff BTL6-U110-M0500-PF-S4 Betriebsanleitung

BTL6-U110-M _ _ _ _ -PF-S4
Micropulse Transducer in a Flat Profile Housing
6
IO-Link interface (continued)
6.4

Parameter data

Index Subindex Parameter
0x0010 0
0x0011 0
0x0012 0
0x0013 0
0x0014 0
0x0015 0
0x0016 0
0x0017 0
0x000C 0
0x000D 0, 1, 2
0x000E 0
0x0018 0
0x0040 0
0x0041 0
Tab. 6-3: Parameter data of IO-Link interface
Access to subindex 0 address the entire object
of an index. Access of subindices >0 addresses
the individual elements of an index.
Device Access Locks
With this standard parameter, it is possible to active or
deactivate certain functions of the IO-Link device. With
BTL6-U110-..., there is the option to lock the function of
the parameter manager. To do so, bit 1 of the 2 byte value
must be set to "1" (locked). In order to unlock the
parameter manager, bit 1 is set to "0".
Bit 0 "Lock parameter access" –
not supported
Bit 1 "Lock Parameter Management" –
supported
Bit 2 "Lock local parameterization" –
not supported
Bit 3 "Lock local user interface" –
not supported
Bit 4 to 15 Reserved
Tab. 6-4: Lock parameter data
14 english
Size
Vendor name 7 bytes
Vendor Text 15 bytes
Product Name Max.
40 bytes
Product ID 12 bytes
Product Text 27 bytes
Serial number Max.
18 bytes
Hardware Revision 2 bytes
Firmware Revision 9 bytes
Device Access Locks 2 bytes
Profile Characteristic 4 bytes
PD Input Descriptor 3 bytes
Application Specific Tag 32 bytes
Null point offset 4 bytes
Takeover of null point Boolean
offset (1 byte)
Access Parameter
management
Read Only —
Read Only —
Read Only —
Read Only —
Read Only —
Read Only —
Read Only —
Read Only —
Read/Write Yes
Read Only No
Read Only No
Read/Write Yes
Read/Write No
Write Only No
Profile Characteristic
This parameter indicates which profile is supported by the
IO-Link device.
The BTL6-U110-... transducer supports the Smart Sensor
Profile with a process data variable:
– Subindex 1 ("Profile Identifier -> DeviceProfileID"):
0x0001 ("Smart Sensor Profile")
– Subindex 2 ("Profile Identifier -> FunctionClassID"):
0x8000 ("Device Identification Objects")
– Subindex 3 ("Profile Identifier -> FunctionClassID"):
0x8002 ("ProcessDataVariable")
PD Input Descriptor
This parameter describes the composition of the process
data variables used.
The BTL6-U110-... transducer processes the process
data variable as follows:
Subindex 1: 0x032000
– 0x03 -> Data type = IntegerT
– 0x20 -> Data size = 32 bits
– 0x00 -> Offset = 0 bits
Application Specific Tag
The "Application Specific Tag" makes it possible to assign
the IO-Link device an arbitrary, 32-byte string. This can
only be used for application-specific identification and
applied in the parameter manager. The entire object is
accessed via subindex 0.
Default value
"BALLUFF"
"www.balluff.com"
"BTL6-U110-Mxxxx-
PF-S4"
"BTL6PFIOLxxx"
"Balluff Position
Transducer"
"YYMMDDXXXXXXXX"
"XX"
"vX.XX.XXX"
0x00 0x01 0x80 0x02
0x03 0x20 0x00
0