Wall Fi Xing With Synthetic Wall Support 6051; Wall Fi Xing With Adjustable Bracket 6057; Recessed Fi Xing With Special Profi Le Nut 6055-2000 - Goelst G-Rail 6200 Serie Gebrauchsanweisung

1
Fixing
Wall fi xing with synthetic wall support 6051
Secure this support on the wall, with one (round head) screw in the upper fixing hole. The
max. weight per support is 10 kg. Clip the rail onto the support as shown in the diagram. Once
installed, the centre of the rail will be 4 cm from the rear wall with the screw hardly visible.
Wall fi xing with adjustable bracket 6057
Wall bracket 6057 is used for wall mounting and consists of a boss and adjustable bar with a
profile insert nut. The max. weight per support is 10 kg. This nut is fastened in the top of the rail.
The support boss is fastened with a single (round head) screw.
The pin can be reduced (once) from 15 cm to a minimum of 7 cm. Wall bracket 6057 can be
combined with the 6059 special return set, for a very compact return.
Recessed fi xing with special profi le nut 6055-2000
G-Rail 6200 rail can be recessed fixed into the ceiling. The rail must be pre-drilled by Goelst /
G-Rail for this purpose. For recessed fixing, the special screws with the small head supplied with
this profile nut must be used. The max. weight per support is 30 kg.
Attention! During installation ensure that the rail and the inside of the profi le are not damaged by
!
the screw and/or screwdriver.
4
25
70 - 150
When recessing curved rails use profile as manufactured to determine
arc.
31
40
6059
min. 22
min. 32