Fixing Rules - Goelst G-Rail 6200 Serie Gebrauchsanweisung

1
Fixing
Attention - If the system is supplied split e.g. for transportation - do not move the elements
! sideways as indicated
See chapter B1 for re-assembly.
!
Attention - If the system is supplied with the 'motor-up option'. See chapter B3.

Fixing rules

Below shown some rules for installing the rail.
- Measuring:
1 - First and last bracket must be 11 cm from the end wall in connection with space for the
notched plate and curtain material to maintain space for the pulley.
2 - For the distance of the centre of the rail see corresponding support (p. 3, 4)
3 - Bracket fixing centres 60 - 80 cm
4 - With heavy curtains, place an extra bracket on each side where the curtain stacks (not
supplied as standard)
5 - The pulley needs at least 1 cm space at the side of the motor.
6 - With 'up-motor' installations, the bracket fixing point must be at least 45 mm from
the wall (B.3).
- Placing brackets (p. 3, 4).
- Placing pulley hooks (p. 5).
- If ordered, placing IR-receiver.
- Placing rail (p. 5).
11 cm
min. 3,5 cm
pulley hooks
min. 1 cm
2
60-80 cm
Example with clamp 6050
60-80 cm