Ceiling Fi Xing With Fi Xing Clamps 6050; Ceiling Fi Xing With Supports 6055-1000 - Goelst G-Rail 6200 Serie Gebrauchsanweisung

Ceiling fi xing with fi xing clamps 6050
Ceiling clamps 6050 are suitable for a maximum total curtain weight of <25 kg, <10 kg /
bracket, otherwise, use 6055-1000 ceiling supports. Fasten each clamp with a (round head)
screw. The first clamp must be at least 3,5 cm from and parallel to any adjacent wall, this allows
the clamp to rotate. Generally, the brackets are placed every 60 cm. For heavier curtains (with
lining material or blackout fabric), place an extra bracket on each side where a curtain is to be
hung. This bracket is not suitable to re-align twisting (distortion) in the rail.
Ceiling fi xing with supports 6055-1000
This support is suitable for a total curtain weight of 100 kg (max. 30 kg per bracket). The supports
should be placed every 60-80 cm. For heavier curtains (with lining material or blackout fabric),
place an extra support on each position (end) where the curtain stacks. Fasten each support with
two (countersunk) screws (4,2 cm centre to centre distance). This bracket is suitable to re-align
twisting (distortion) in the rail.
23
24
1
Fixing
42
54
3