Basic Configuration Of The Kvm-Over-Ip™ Connection; Adding End Devices - G&D ControlCenter-IP Installationsanleitung

Basic configuration of the KVM-over-
IP™ connection
This section explains the settings required for start-up the IP matrix switch.
NOTE: All settings of the KVM-over-IP™ connection are described in detail in the
documentation of the web application of the IP matrix switch.

Adding end devices

Compatible devices of the
added by the IP matrix switch.
The KVM-over-IP™ connection of the end device is automatically configured by
the IP matrix switch and is then immediately ready for operation.
NOTE:
Alternatively, you can set up the initial KVM-over-IP™ connection of each
end device manually, as described in the chapter Establishing a KVM-over-IP™ con-
nection for the first time of the end device manuals.
How to add (more) end devices:
1. Start the computer's web browser and enter the URL in the address line.
https://[IP address of the device]
2. Click on Download Config Panel
3. Enter a username and a password to log on to the web application.
NOTE: The default login details of the administrator account are:
 Username:
 Password:
Make sure to change the administrator account's default password. Detailed
instructions on how to change the login details can be found in the web applica-
tion manual.
4. In the directory tree, click on
5. Right-click on the IP matrix switch.
Basic configuration of the KVM-over-IP™ connection
Vision-IP series can be automatically searched for and
.
Admin
4658
KVM matrix system > [Name] > Matrix switches
.
G&D ControlCenter-IP · 13