The »Controlcenter-Ip« Ip Matrix Switch; Scope Of Delivery - G&D ControlCenter-IP Installationsanleitung

The »ControlCenter-IP« IP matrix switch
The »ControlCenter-IP« IP matrix switch
The IP matrix switch ControlCenter-IP is the central component of the G&D IP matrix
system.
You can use the IP matrix system to access an IP computer module (
user module (
CON
the video image is displayed at the console monitor. You can now operate the
accessed computer with console keyboard and console mouse.
You can use any device of the
 As IP user modules you can use the
,
DP1.2-Vision-IP DP-Vision-IP
 You can use the
series as IP computer modules.
In the standard scope of delivery, the IP matrix switch supports a maximum of 20
end devices. The number of devices can be increased by purchasing a feature key.

Scope of delivery

 1 × IP matrix switch ControlCenter-IP
 2 × power cable (PowerCable-2 Standard)
 1 × rackmount set
 1 × manual »Installation Guide«
 1 × manual »Config Panel« web application
4 · G&D ControlCenter-IP
). By accessing the computer connected to the computer module,
Vision IP
and
DVI-Vision-IP
CPU modules of the
series as end devices of the IP matrix:
modules of the
CON
series.
DP1.2-Vision-IP , DP-Vision-IP
USB 2.0 Devices
Ident. Power Status
Red. Ready
Main System
) with an IP
CPU
,
DL-DVI-Vision-IP
, DVI-Vision-IP
Service