Restricting Kvm-Over-Ip Remote Stations (Uid Locking) - G&D ControlCenter-IP Installationsanleitung

Basic configuration of the KVM-over-IP™ connection
5. Select the
Multicast video
options:Press
F2
system:
on:
off:
IMPORTANT:
The selected setting is only applied when a new connection is estab-
lished. Existing connections are retained unchanged.
Restricting KVM-over-IP remote stations (UID lock-
ing)
By default, each computer module and each user module is allowed to establish a
KVM-over-IP connection to the IP matrix switch.
TIPP:
Activate the function
les or user modules should be able to connect to the IP matrix switch.
How to enable/disable UID locking:
1. Start the web application of the
2. In the directory tree, click on
3. Double-click the IP matrix switch.
4. Click on the tab
16 · G&D ControlCenter-IP
entry and press
to save your settings.
Apply system-wide setting (see above).
This target module (
cast to other user modules (
This option allows users with »Target multi access« right to
connect to this computer, even if another user is already con-
nected.
This target module (
cast to other user modules (
It is not possible to connect a user to this computer if another
user is already connected (message:
UID locking
IP matrix switch
KVM matrix system > [Name] > Matrix switches
KVM connection .
to select one of the following
F8
IP-CPU ) sends the video stream via multi-
IP-CON ).
IP-CPU ) sends the video stream via uni-
).
IP-CON
if you want to specify which computer modu-
.
).
No multicast video
.