Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
How to configure the system-wide multicast or unicast video transmission
setting:
1. Press the
Ctrl+Num
2. Press
to call the
F11
3. Select the
entry and press
System
4. Select the
Multicast video
on:
off:
5. Press
to save your settings.
F2
IMPORTANT:
The selected setting is only applied when a new connection is estab-
lished. Existing connections are retained unchanged.
How to configure the individual multicast or unicast video transmission settings
of a target module:
1. Press the
Ctrl+Num
2. Press
F11
to call the
3. Select the
entry and press
Target
4. Select the target module you want to configure and press
ADVICE:
Use the menu's search function, the view filter or the sort criteria to limit the
selection of list entries.
Basic configuration of the KVM-over-IP™ connection
(default) hotkey to open the on-screen display.
menu.
Configuration
.
Enter
entry and press
F8
By default, the target modules (
via multicast to the user modules (
This option (standard) allows users with »Target multi access«
right to connect to a computer to which another user is
already connected.
The target modules (
IP-CPU
to the user modules (
The connection of a user to a computer to which another
user is already connected is not possible in this mode (mes-
sage:
No multicast video
(default) hotkey to open the on-screen display.
Configuration
menu.
.
Enter
to select one of the following options:
IP-CPU
) send the video stream
).
IP-CON
) send the video stream via unicast
IP-CON
) by default.
)!
.
F5
G&D ControlCenter-IP · 15
Werbung
Kapitel
Inhaltsverzeichnis
