Special Case: Unicast Transmission - G&D ControlCenter-IP Installationsanleitung

Special Case: Unicast Transmission

If you do not want to allow users in your IP matrix system to connect to a computer
on which another user is already connected, the IP matrix switch can alternatively be
operated in unicast mode (see
page 14 ff.).
In unicast mode, the target modules (
the user modules (
IP-CON
user is already connected is not possible in this mode (message:
NOTE: If multicast transmission is not used, the network switch will have to meet
considerably fewer requirements.
The following requirements and settings of the network switch listed above do not
apply in this case:
Multicast, IGMP, IGMP Snooping, IGMP Snooping Querier,
Fast Leave/Immediate Leave and Spanning Tree TCN Flooding.
Determination of the type of video transmission on
IP-CPU ) send the video streams via unicast to
). The connection of a user to a computer to which another
Selecting a switch
No multicast video )!
G&D ControlCenter-IP · 7