Working In A Lateral Direction; Working In Lanes; Switching Off The Cleaner; Instructions For Use - Kärcher BR VS 400 Betriebsanleitung

English

Working in a lateral direction

Pull the catch upwards and hold
Tip the pushing handle backwards
Pull the lower lever;
Rotary brush drive ON
*
Move the cleaner to the LEFT and
–
RIGHT by turning the pushing
handle
At the same time go backwards
–
slowly
Press the top switch-stirrup as
–
required, the cleaning agent
solution is fed to the rotary brooms
BR VS 400

Working in lanes

Press the pushing handle downwards
and turn to the LEFT or RIGHT
Pull the catch upwards and hold
Tip the pushing handle backwards
Pull the lower lever;
Rotary brush drive ON
*
Move the appliance slowly
–
backwards or forwards in long
sweeping movements
Press the top switch-stirrup as
–
required, the cleaning agent
solution is fed to the rotary brooms

Switching off the cleaner

Release both levers
Tip the pushing handle forwards;
–
The catch locks automatically
*
When necessary push the pushing
–
handles down and turn back to the
initial position
15
Note:
Do not leave the cleaner on the rotary
brushes

INSTRUCTIONS FOR USE

Warning!
The cleaner must always be in motion
during operation!
Do not work on one spot as this may
damage the floor covering!
Instructions for use
Prior to using the appliance on
delicate surfaces (PVC, carpets)
tilt it
–
Switch the cleaning agent feed on
–
Do not operate it until the machine
–
has been filled with cleaning agent.
Note:
The cleaning agent feed is effected
only if the brush drive is switched on.