English
Scrubbing
Remove loose dirt by brushing
*
before working with the cleaner
Match the amount of cleaning
*
agent solution on the floor covering
to the level of dirt
Select rotary brushes suitable for
*
the dirt and floor covering
Polishing
Polishing is carried out without
*
using liquid
The brush well must be as dry as
*
possible before the pad is fitted
EACH TIME AFTER USAGE
Pull out the plug
Pull the power cable out of the
–
socket
Disconnect the plug from the power
–
cable
Remove the strain-reliever
Emptying the tank
Remove the tank, empty and rinse
with water
BR VS 400
Note:
Dispose of the cleaning agent
solution in accordance with the
relevant regulations.
Heed the instructions of the cleaning
agent's manufacturer.
Switching off the cleaner
Release the pushing handles and tip
forwards
Lift the appliance
Engage the safety device
Position the cleaner vertically
Note:
Do not leave the cleaner on the rotary
brushes
16
Dismantle the rotary brushes
Note:
If the machine is not positioned
vertically the rotary brushes must be
dismantled
Remove the tank
–
Carefully lay the cleaner down
–
Press down and suspend the rotary
brushes
Remove the rotary brushes from the
gearing