English
Open the cap
Fill the tank with the required amount
of fresh water
Note:
The maximum water temperature
must be 50°C.
Place the tank onto the cleaner
–
Check that the tank is positioned
–
correctly
Fill the tank with the required amount
of cleaning agent
Close the catch
–
Use a cloth to wipe away excess
–
liquid that pours out
Mix the cleaning agent well
–
BR VS 400
Fitting the plug
Connect the plug to the power cable
Hang the power cable in the strain-
–
reliever
Plug the cable into the power
–
socket
Adjusting the splash shield
Undo the fastening screw
–
Set the splash guard according to
–
each application.
Tighten fastening screw.
–
Note:
Adjust the splash guard parallel to the
floor
Turning the pushing handle
Press the pushing handle
–
downwards and turn to the LEFT or
RIGHT
Release strain on the pushing
–
handle and turn, it locks in several
positions
13
Releasing/locking the pushing
handle
Pull the catch upwards and hold
Tip the pushing handle backwards
Tip the pushing handle forwards;
The catch locks automatically
*