Technical Specifications; Specifications; Maximum Load - Simco Multi Power Master Bedienungsanleitung

4. Technical specifications

4.1. Specifications

Rated input voltage
Input voltage limit values
Input current:
Rated frequency
Frequency limit values
Output voltage
Output current
Maximum capacitive load
Output frequency
Ambient conditions
Operating environment
Weight
Dimensions
Options,
only applicable to MPM with I/O connector
for remote control functions (MPM-xxR), see
also section 6

4.2. Maximum load

The load on the MPM is determined by the ionisation equipment connected and the shielded
connecting cable used. The capacitive load of the equipment and cables must be added
together in order to calculate the total load of the MPM.
Note:
- The maximum output current of the MPM is 3 mA.
- The maximum capacitive load of the MPM is 1500 pF.
- When the ion balance option is used (only with the MPM-xxR), the maximum
capacitive load of the MPM is lower in some cases than 1500 pF, see also
table 1.
MPM_UM_9752080610_NL_D_GB_F_V1_5
100 - 240 V AC
88 - 264 V AC
0.7 - 0.3 A
50/60 Hz
47–63 Hz
MPM-23x: 3.3 kV AC ±5%
MPM-24x: 4.0 kV AC ±5%
MPM-25x: 5.0 kV AC ±5%
MPM-27x: 6.4 kV AC ±5%
Max. 3 mA, see chapter 4.2
1500 pF, see chapter 4.2
50 ± 0.5 Hz
0 – 50C, max. 90% RH, non-condensing
Industrial, internal use
3 kg
(L x W x H)
- Switching high voltage on/off via remote control:
Activate this option with dipswitch 1 [ON]
Control voltage specifications:
0 V DC = OFF
10–30 V DC (max. 20 mA) = ON
- High voltage ON remote signalling:
Maximum load: 30 V DC, 50 mA
- Overload remote signalling:
Maximum load: 30 V DC, 50 mA
- External voltage 24 V DC (±0.5 V):
Maximum load: 100 mA
- Ion balance control:
Activate this option with dipswitch 2 [ON]
Control voltage specifications:
0–10 V DC, Input resistance 8 kΩ
0 V DC = Ion balance most negative
10 V DC = Ion balance most positive
- Biphase control:
Master MPM (standard) with dipswitch 3 [OFF]
Slave MPM with dipswitch 3 [ON]
GB
40