Electrical Connection; Connecting An Electronic Contact Thermometer Hei-Con - Heidolph MR Hei-Standard Betriebsanleitung

E
3

Electrical connection

Plug the AC power cord into its socket (H) on
the rear panel. Connect the power cord to an
AC power outlet.
Rule of thumb:
Set the temperature of the hotplate to around 1½ to 4 times that of the
desired set temperature on the Hei-Con. This will compensate for the
loss of heat between the hotplate and the medium.
Before connecting the
instrument to an AC power
outlet, ensure that the rocker
switch (A) is set to "0".
4 Connecting an electronic contact
thermometer Hei-Con
The Hei-Con and Hei-Con-G permit the
temperature of the medium to be controlled in
addition to that of the hotplate.
Connect the Hei-Con to the socket (I) on the
rear panel of the instrument. For more
information, please refer to the instruction
manual of the Hei-Con.
24