Electrical Connection; Connecting A Hei-Con Temperature Controller (Not Hei-Mix D) - Heidolph MR Hei-Mix D Betriebsanleitung

E
3

Electrical connection

Plug the AC power cord into its socket (H) on
the rear panel. Connect the power cord to an
AC power outlet.
4

Connecting a Hei-Con temperature controller (not Hei-Mix D)

Rule of thumb:
Set the temperature of the hotplate around 20–30 °C higher than the
desired set temperature on the Hei-Con. This will compensate for the
loss of heat between the hotplate and the medium.
Before connecting the instrument to
an AC power outlet, ensure that the
rocker switch (A) is set to "0".
The Hei-Con and Hei-Con-G permits the
temperature of the medium to be controlled in
addition to that of the hotplate.
Connect the Hei-Con to the socket (I) on the
rear panel of the instrument. For more
information, please refer to the instruction
manual of the Hei-Con.
22