Description Of Symbols; Standard Equipment; Preparing The Appliance For Operation; Assembling The Handlebar - Viking MB 2 RT Gebrauchsanleitung

- Never store the appliance
with petrol in the tank inside
a building. The resulting
petrol fumes could come
into contact with naked
flames or sparks and could
be ignited.
- Allow the engine to cool
before storing the appliance
in an enclosed space.
- Engine-powered
appliances
generate
poisonous exhaust
gases when the engine is
running. These gases may
be odourless and invisible.
Never work with engine-
powered appliances in a
closed or poorly ventilated
room.
Danger to life through
poisoning!
- If it is necessary to drain
the tank, this must be done
out of doors (drive until
empty).
6

Description of symbols

Warning!
Read the instruction
manual before initial
use.
Risk of injury!
Keep other persons
away from the
danger area.
Risk of injury!
Detach the spark
plug socket before
performing work on
the cutting tool or
maintenance and
cleaning work.
Risk of injury!
The cutting tool runs
on for several
seconds after
switching off
(engine / blade
brake)

Standard equipment

Item Designation Qty.
1 Basic unit
2 Spark plug wrench
•
Instruction Manual
• Engine instruction
manual
Preparing the appliance
for operation
NOTE
Place the appliance on level
and firm ground to perform
this work.
CAUTION
Risk of injury!
Detach the spark plug
socket before performing
assembly work on the
appliance.
Assembling the
handlebar
2
NOTE
1
The machined grooves in
the threads prevent the
1
rotary handles from
1
becoming completely
detached from the bolts.
(safeguard against loss)
1
Fold the
A= upper handlebar back in
the direction of the arrow
and fit onto both parts of
the
E= lower handlebar.
Tighten
D= rotary handles on both
sides in direction of
arrow.
NOTE
In order to prevent the cable
from becoming tensioned
when folding down the upper
handlebar, ensure that the
cable is laid over the rotary
handle (see illustration).
0478 111 9911 B - EN
3