Herunterladen Inhalt Inhalt Diese Seite drucken

Description Of Symbols; Standard Equipment; Preparing The Machine For Operation; Installing Mono Handlebar - Viking ME 339 Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für ME 339:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Risk of injury due to the mowing blade!
Always store an old lawn mower in a safe
place prior to scrapping. Ensure that the
machine and the mowing blade are kept
out of the reach of children.

5. Description of symbols

Caution!
Read the instruction man-
ual before initial use.
Risk of injury!
Keep other persons out of
the danger area.
Risk of injury!
Beware of the sharp mowing
blade. The mowing blade
runs on for several seconds
after switching off
(motor/blade brake). Before
performing any work on the
cutting tool, before carrying
out maintenance and clean-
ing work, before checking
whether the electric cable is
entwined or damaged, or
before leaving the machine
unattended, switch off the
motor and disconnect the
plug.
0478 121 9917 E - EN
Danger of electric shock!
Keep the electric cable
away from the cutting tool.
ME 339:
Start motor.
ME 339 C:
Start motor.
ME 339 C:
Stop motor.

6. Standard equipment

Item
Designation
A
Basic unit
B
Upper part of grass catcher
box
C
Lower part of grass catcher
box
D
Pin
Instruction manual
ME 339 C:
E
Washer
F
Screw
G
Pin
H
Clamping piece
I
Quick-clamping device
ME 339:
J
Flat head bolt
K
Cable guide
L
Rotary handle
M
Cable clip
7. Preparing the machine for
operation
7.1 General
Risk of injury!
Observe the safety instructions in
the section "For your safety" (
● Place the machine on level and firm
ground when performing all the
operations described.

7.2 Installing mono handlebar

(ME 339 C)
● Locate mono handlebar (1) in
2
working position in handlebar
Qty.
console (2) and hold.
1
● Insert left and right clamping pieces (H)
1
into handlebar console (2) as
illustrated. Fit washer (E) onto
1
screw (F) and guide screw (F) through
clamping pieces and lower handlebar
from the inside to the outside.
2
1
● Fit washer (E).
● Insert pin (G) in quick-clamping
device (I) and screw both together onto
2
screw (F).
1
● Close quick-clamping device (3).
1
2
1
2
1
2
1
4.).
3
4
33

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Me 339 c

Inhaltsverzeichnis