Registering Dect8048 Handsets; Registering Other Dect-Gap Telephones On The Base Station; Registering A Handset On A Dect/Gap Base Station From Another System Or Manufacturer; Deregistering Handsets - AUDIOLINE DECT 8048 -SOS Bedienungsanleitung

8.13.1

Registering DECT8048 handsets

The maximum number of devices is 4 handsets or 3 handsets and 1 alarm unit.
Note:
1. Press and hold the Paging button
Register the new handset on the base station within 90 seconds.
B
2. Press the
D E
3. Use and
D E
4. Use and
5. Enter the number of the base station (1 - 4) using the digit keys. If the handset is already connected to a
base station, the corresponding number flashes.
6. Confirm your entry by pressing the
7. When the base station is found, enter the base station PIN (default setting 0 0 0 0).
8. Confirm your entry by pressing the
handset is now registered and can be used for internal and external calls.
9. The handset is then automatically assigned an internal call number. The main handset already registered
has the internal call number 1. The second handset registered is assigned the internal call number 2. This
internal call number appears in the display to the right of the name of the telephone.
8.13.2

Registering other DECT-GAP telephones on the base station

The maximum number of devices is 4 handsets or 3 handsets and 1 alarm unit.
Note:
In order to register a DECT-GAP handset, follow the instructions on registering a handset on the base station in the
operating manual provided by the external manufacturer. Then press the
DECT8048 until an acoustic signal is issued. Use the PIN code to register (default setting: 0 0 0 0).
8.13.3

Registering a handset on a DECT/GAP base station from another system or manufacturer

1. Prepare the base station
Follow the instructions under "Registering additional handsets" in the operating manual of the base station
to which you want to register your handset.
2. Registering the DECT8048 handset
Proceed as described above from Step 2 but use the PIN code of the base station you want to register on
(instead of 0 0 0 0).
8.13.4

Deregistering handsets

A handset can only be deregistered by another handset still registered. This means it is not possible to complete the
deregistration using the handset which is to be deregistered. The alarm unit can be deregistered using the handset.
B
1. Press the
- Advanced Functions -
t
on the base station for 6 seconds until two acoustic signals are issued.
button on the handset.
to select the REGISTER menu and confirm by pressing
to select the REG BASE menu and confirm by pressing
B
B
button on the handset.
button. A search is then made for the base station.
button and an acoustic signal is issued after a few seconds. The
t
B
.
B
.
button on the base station of the
67