How To Enter Names; Assigning Ring Tones - AUDIOLINE DECT8049 Bedienungsanleitung

5.2

How to enter names

The number keys are also printed with letters for entering names. By repeatedly pressing
the appropriate button, letters as well as numbers and special characters can be entered.
Example: You want to enter the name "Peter".
Press: 1 x button 7, 2 x button 3, 1 x button 8, 2 x button 3, 3 x button 7
- A space is entered by pressing the number 1.
- As soon as you press one of the buttons 1 to 0, the top line of the display will show which
letters and special characters are available on the selected button.
- To enter the same letter twice or to enter another letter on the same button, press the
appropriate letter and then wait until the cursor automatically jumps to the next position.
- Initial letters are automatically written in upper case. You can switch between upper case
and lower case letters with the
display icon .
- Incorrect entries can be deleted with the Clear display button.
5.3

Assigning ring tones

One of the ring tones can be assigned to each phone number stored in the phone book so
that you can tell who is calling you simply from the ring tone. If the caller has suppressed
transmission of his phone number (CLIP), then there will be no assignment.
1. Press the Dir display button. If numbers have already been stored, a name will be seen
in the display.
2. You can now select the required phone book entry, to which you want to assign a
special ring tone, with the
choose an entry from the phone book alphabetically.
3. Press the Options display button.
4. Select Set Melody with
5. Select the required ring tone with
6. If you want to assign more ring tones, proceed as under Item 2. You can return to the
main display by means of the
- Phone book -
button. If you have upper case selected, you see the
and buttons. Press the appropriate letter to directly
and and confirm with OK.
and and confirm with OK.
button.
51