Attaching The Carrying Belt To The Basic Appliance; Putting The Attachment On The Basic Appliance; Operation; Switching The Appliance On And Off - AL-KO CSA 4020 Betriebsanleitung

Operation

IMPORTANT!
Danger of damage to the
appliance
Due to the metallic abra-
sion it contains, the use of
used oil for lubricating the
chain would lead to prema-
ture wear of the guide rail
and saw chain. Also, the
warranty of the manufac-
turer will become void.
■
Never use used oil, only
biologically degradable
saw chain oil.
IMPORTANT!
Danger of environmental
damage
The use of mineral oil for
the chain lubrication leads
to serious environmental
damage.
■
Never use mineral oil,
but only biologically de-
gradable saw chain oil.
Each time before starting work or changing the
rechargeable battery, check the oil level and re-
plenish the saw chain oil if necessary:
1. Check the oil level in the viewing aperture
(08/1) of the oil tank. It must always be pos-
sible to see oil. The minimum and the max-
imum oil level must not be exceeded.
2. Place and hold the polemounted pruner hori-
zontal on a firm surface.
3. Clean the appliance around the oil tank cap
(08/2).
4. Unscrew the oil tank cap (08/2).
442337_a
5. Fill the oil tank with biologically degradable
saw chain oil. While doing so, check the oil
level in the viewing aperture (08/1) of the oil
tank. Do not allow it to overrun.
■
Use a funnel for easier filling.
■
Do not allow any dirt to get into the oil
tank.
6. Screw down the oil tank cap (08/2) again.
4.4 Attaching the carrying belt to the basic
appliance
See "Multitool MT 40 – basic appliance" operat-
ing instructions.
4.5 Putting the attachment on the basic
appliance
See "Multitool MT 40 – basic appliance" operat-
ing instructions.
5 OPERATION
CAUTION!
Danger of burns
The gearbox housing be-
comes hot during opera-
tion.
■
Do not touch the gear-
box housing.
5.1

Switching the appliance on and off

See "Multitool MT 40 – basic appliance" operat-
ing instructions.
39