Using The Accessories - Electrolux EOC5654TAX Benutzerinformation

12 www.electrolux.com
time setting flash in the display. The
oven turns off automatically.
4. Press any button or open the oven
door to stop the signal.
5. Turn the knob for the oven functions
to the off position.
7.4 Setting the END
1. Set an oven function.
2. Press
starts to flash.
3. Turn the knob for the temperature
right or left to set the hours and press
to confirm. Turn the knob for the
temperature right or left to set the
minutes and press
At the set End time the signal sounds for
2 minutes.
the display. The oven turns off
automatically.
4. Press any button or open the oven
door to stop the signal.
5. Turn the knob for the oven functions
to the off position.
7.5 Setting the TIME DELAY
function
1. Set an oven function.
2. Press
starts to flash.
3. Turn the knob for the temperature
right or left to set the minutes for
DURATION time and press
confirm. Turn the knob for the
temperature right or left to set the
hours for DURATION time and press
to confirm.
The display shows flashing

8. USING THE ACCESSORIES

WARNING!
Refer to Safety chapters.
again and again until
to confirm.
and time setting flash in
again and again until
.
4. Turn the knob for the temperature
right or left to set the hours for END
time and press
the knob for the temperature right or
left to set the minutes for END time
and press
Oven turns on automatically later on,
works for the set DURATION time and
stops at the set END time.
At the set END time the signal sounds for
2 minutes.
the display. The oven turns off.
5. Press any button or open the oven
door to stop the signal.
6. Turn the knob for the oven functions
to the off position.
7.6 Setting the MINUTE
MINDER
Minute minder can be both set when the
oven is turned on and off.
1. Press
and "00" flash in the display.
2. Turn the knob for the temperature
right or left to set the seconds and
than the minutes.
When the time you set is longer than
60 minutes,
3. Set the hours.
4. The MINUTE MINDER starts
automatically after 5 seconds.
After 90% of the set time the signal
to
sounds.
5. When the set time ends the signal
sounds for 2 minutes. "00:00" and
flash in the display. Press any button
to stop the signal.
8.1 Using the core temperature
sensor
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
oven turns off.
There are two temperatures to be set:
to confirm. Turn
to confirm.
and time setting flash in
.
flash in the display.