Installation - Vetus WSD822 Installationsanleitung

[1Jrnl1Oil~
Wind speed/wind direction indicator WSD822
Installation
Meters
For dimensions see drawing at page 25.
Using the template provided, cut out openings in the instrument panel or
bulkhead. Attach each meter using the 4 threaded rods and nuts provided. Ensure
that the seal sits correctly between the meters and the panel or bulkhead.
Rotor/vane-unit
For dimensions see drawing at page 25.
The rotor/vane-unit should be fitted in a position unshielded from the wind and
away from any possible source of eddies which could give misleading readings.
On a sailing
boat
the mast head is the best position. If this is not practical, or on a
vessel without a mast, the unit should be located as high as possible in a position
fully exposed to the wind.
Mount the rotor/vane-unit using the 2
plastic brackets which clamp the tube
of the rotor/vane-unit at the same time
fixing the unit to the top of the mast or
whatever surface has been selected to
mount the rotor-unit. Attach the 2
brackets with the 2 self-tapping screws
provided. When mounted the
rotor-cups should rotate in a horizontal
plane.
5 10.0302
~
..,
"lvr/
~ //.,. ,1"
//