Service; Appliance-Specific Safety Instructions - Parkside PMFS 200 A1 Originalbetriebsanleitung

5. Service

a) Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of
the power tool is maintained.
b) Always arrange for the plug or the power
cord to be replaced by the manufacturer of
the appliance or by its approved customer
services. This will ensure that the safety of the
power tool is maintained.
Appliance-specific safety instructions
■ Secure the workpiece. A workpiece securely
held by a clamping device or vice is much safer
than one held in your hand.
■ Do not rest your hands next to or in front of the
appliance and the area being worked as there
is a risk of injury if you slip.
■ In case of danger, remove the plug from the
socket immediately.
■ Always route the power cord towards the rear,
away from the appliance.
■ RISK OF FIRE DUE TO FLYING SPARKS!
If you sand metal, sparks will be produced.
Ensure that nobody can be put at risk and that
no combustible materials are located in the im-
mediate vicinity of where you are working.
WARNING! TOXIC VAPOURS!
► Working with the tool can produce harmful/
toxic dusts that represent a health hazard for
the person operating the appliance and for
any other people in the area.
PMFS 200 A1
WARNING! DANGER FROM DUST!
► When working for extended periods of time
on wood and, in particular, materials that
produce dust that is hazardous to health, con-
nect the appliance to an appropriate external
dust extraction appliance. Wear safety gog-
gles and a protective dust mask!
■ Provide sufficient ventilation when working on
plastics, paints, lacquers, etc.
■ Do not soak the materials or the area to be
processed with liquids containing solvents.
■ Never work on moistened materials or damp
surfaces.
■ Avoid sanding lead paint or other harmful
materials.
■ Materials containing asbestos may NOT be
processed. Asbestos is a known carcinogen.
■ Avoid contact with the sanding sheet while the
appliance is running!
■ Do not use the appliance without a sanding
sheet fitted.
■ Never use the appliance for other purposes
and only original parts/accessories. Using
attachments or accessory tools other than those
recommended in the operating instructions can
lead to a risk of injury.
■ Always allow the appliance to come to a
complete standstill before putting it down.
■ The appliance must always be kept clean, dry
and free from oil or grease.
GB
5