If Operating A Power Tool In A Damp Location Is Unavoidable, Use A Residual Current Device; Personal Safety - FLORABEST FKS 2200 E3 Originalbetriebsanleitung

GB
Avoid body contact with
•
earthed or grounded surfaces,
such as pipes, radiators, ranges
and refrigerators. There is an in-
creased risk of electric shock if your
body is earthed or grounded.
Do not expose power tools to
•
rain or wet conditions. Water
entering a power tool will increase the
risk of electric shock.
Do not abuse the cord. Never use
•
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged
or entangled cords increase the risk of
electric shock.
When operating a power tool
•
outdoors, use an extension cord
suitable for outdoor use. Use of a
cord suitable for outdoor use reduces
the risk of electric shock.
If operating a power tool in a
•
damp location is unavoidable,
use a residual current device
(RCD) protected supply. Use of an
RCD reduces the risk of electric shock.
• Use only approved power cable of
type H05RN-F, which are no more than
75 m in length and intended for use
outdoors. The conductor cross section
of the cord must be at least 2.5 mm2.
Always fully unroll a cable drum be-
fore use. Check the power cord for
damage.

Personal safety

Stay alert, watch what you are
•
doing and use common sense
when operating a power tool.
Do not use a power tool while
you are tired or under the influ-
10
IB-270730-FKS_2200_E3-RO-BG-GR-03112015-rev03-ts.indb 10
ence of drugs, alcohol or medi-
cation. A moment of inattention white
operating power tools may result in
serious personal injury.
Wear personal protective equip-
•
ment and always wear safety
glasses. Wearing personal protective
equipment such as nonslip safety boots,
cut protection trousers, a hard hat or ear
protection reduces the risk of injuries.
Prevent unintentional starting.
•
Ensure the switch is in the off-
position before connecting to
power source and/or battery
pack, picking up or carrying
the tool. Carrying power tools with
your finger on the switch or energising
power tools that have the switch on
invites accidents.
Remove any adjusting key or
•
wrench before turning the pow-
er tool on. A wrench or a key left at-
tached to a rotating part of the power
tool may result in personal injury.
Do not overreach. Keep proper
•
footing and balance at all times.
This enables better control of the pow-
er tool in unexpected situations.
Keep your hair, clothing and
•
gloves away from moving parts.
Jewellery or long hair can be caught in
moving parts.
Warning! During operation, this elec-
•
tric tool generates an electromagnetic
field which, under certain circumstances,
may impair the functionality of active
or passive medical implants. To reduce
the risk of serious or lethal injuries, we
recommend that persons with medical
implants consult their doctor and the
manufacturer of their medical implant
before operating the machine.
04.11.15 12:47