Preparatory Measures - Pkm KG 280 IX Bedienungsanleitung

NOTICE! You should contact a qualified technician if you want to have
the door swing reversed. Only try to carry out the steps described below
when you believe that you are qualified to do so.
NOTICE! Adjust the doors properly before you finally tighten the screws
of the hinges. The seals must close properly.
 Empty the appliance.
 If possible, remove all door trays, glass shelves and drawers from the fridge /
freezer so that they cannot be damaged.
 It is necessary to tilt the appliance backwards while removing the doors. Lean
the appliance against a solid and immovable surface so it will not slip while
changing the hinge positions.
 Do not lay the unit flat as this can damage the cooling system.
 All parts removed must be saved for proper reinstallation of the doors.
 Always remove the doors carefully. Keep the doors in a safe place so that
they cannot be damaged.
T
OOLS REQUIRED
8 mm socket wrench
Flat bladed screwdriver
Monkey wrench
P
REPARATORY MEASURES
(
NOT INCLUDED IN THE SCOPE OF DELIVERY
62
:
Cross-head screwdriver
8 mm spanner
Putty knife
):