Printing - Sony UP-D70XR Gebrauchsanweisung

Printing

20
Operation
Before printing
• Ensure that the printer is properly connected to the computer (page 10).
• Ensure that the combination of the ink ribbon and print paper is correct (pages 14
and 17).
• Ensure that the ink ribbon cassette and print paper are properly loaded (page 33).
1
1
Turn on the power of the printer and computer.
When the printer is in standby status, the following message appears in the
printer window display.
RE ADY
A 4 QT Y
Notes
• When the printer is connected to the computer through the SCSI bus, turn on
the power of the printer before turning on the computer.
• Never turn the printer on or off while the power of the computer is on.
2
Send the image data from the computer to the printer, then enter the print
command or press the PRINT button of the printer.
1 While the printer is receiving the image data from the computer, the
following message appears:
The data is written in the memory of the printer.
I MAGE T RANS F ER
>>>
RGB [
STOP button
Printer window display
The size of the paper being loaded
1
Number of copies to be printed
]
Indicates the data is being transmitted.
2
Paper outlet
(Continued)