Sony UP-D70XR Gebrauchsanweisung Seite 21

2The stored image data is printed as soon as the print command is entered
from the computer or the PRINT button of the printer is pressed.
PR I N T I NG
< >
Y E L L OW QT Y
3Depending on the size of image, type of ribbon, and/or resolution mode, it
takes about one to two minutes for a printout to emerge from the paper
outlet.
Once printing has been completed, the printer returns to standby status.
RE ADY
A 4 QT Y
Notes
• Do not pull the paper out till the printer finishes printing.
• To prevent paper jamming, do not allow more than 20 printouts on the paper
cover.
To stop receiving the data or to stop printing midway
Press the STOP button. Data reception is abandoned midway and the printer is reset
to standby status. When the printing is abandoned midway, the following message
appears. After the print paper remained in the printer is ejected, the printer is reset
to standby status.
P L E A S E WA I T
Note
When the computer with Windows is used, the computer may hang up if you press
the STOP button during data transmission. It is recommended to stop printing
midway on the computer site.
To make a second copy of a printout
Execute the print menu of the computer again or press the PRINT button of the
printer. The image data stored in the memory is printed again.
About memory
The image data sent from the computer is stored in the memory of the printer.
Color indication changes as the color printing
proceeds:
Color printing:
Startingn YELLOWn MAGENTAn CYAN
n Finishing
Laminate printing:
1
Startingn CYANn LAMIn Finishing
Black and white printing:
StartingnB/W nFinishing
1
21
Operation