Selecting The Gamma Curve - Sony UP-D70XR Gebrauchsanweisung

Selecting the Gamma Curve

28
Operation
Notes
• Be sure to select the gamma curve prior to adjusting the halftone (GAMMA
item) on the COLOR ADJUST menu explained in "Adjusting the Printout" on
page 24.
• This function is effective only when using the UPC-8810 or the UPC-8817 Color
Printing Pack.
1
Press the MENU button.
Note
If you do not press any button for approximately 15 seconds after pressing the
MENU button, the printer is automatically reset to standby status.
2
Display the GAMMA ADJUST menu by pressing the ◊ or √ button.
The GAMMA ADJUST menu appears.
GAMMA AD J US T
< CG> PHOTO
The printer enters the gamma curve selection mode.
3
Select the desired gamma curve by pressing the ı or ∫ button
GAMMA AD J US T
< CG> PHOTO
Position < > over the desired gamma curve by pressing
the ı or ∫ button.
Desired printout
A printout of image data created by computer graphics application
programs.
A printout of image data such as human beings, scenery and so on
created with photographic imaging programs.
The gamma curve is fixed to PHOTO when you use printing packs other than
the UPC-8810 or the UPC-8817.
4
To exit from the gamma selection mode, press the MENU button again.
The printer returns to standby status.
1, 4 2, 3
Select
CG
PHOTO