Making Print-Outs; Operation Printing - Sony UP-D890 Gebrauchsanweisung

Operation
Printing

Making Print-outs

Stopping printing on the way
Feeding the print paper
30
Operation
Before making print-outs, check the following:
• Did you connect the printers correctly? (p. 25)
• Did you set the DIP switches correctly? (p. 26 – 27)
• Did you install the printer driver?
• Did you load the paper correctly? (p. 28)
1
Press the power ON/OFF switch to turn on the printer.
The power indicator lights.
ON/ OFF
2
Make sure that the PAPER EMPTY indicator is not lit.
If lit, load paper.
3
Send the image data to the printer by setting the application software.
The image data is transmitted via centronics interface.
Press the OPEN/CLOSE button while printing. The printer stops printing.
Press the FEED button. The paper is fed as long as you are pressing the button.
FEED OPEN / CLOSE
RECEIVING PAPER EMPTY
PAPER EMPTY indicator