Sony UP-D70XR Gebrauchsanweisung Seite 15

1
Open the ribbon door by pulling the tab on the ribbon door and marked with
PULL.
2
Remove the ink ribbon cassette by pressing the EJECT button.
The ink ribbon cassette pops out.
Note
Never put your hand into the ink ribbon compartment. The thermal head
becomes very hot. You may burn yourself if you touch it.
3
Detach the used ink ribbon from the ink ribbon holder.
1 Remove the spool with the
ink ribbon, while pressing in
the arrow direction.
4
Load the ink ribbon to ink ribbon holder.
1 Load the spool holding the ink ribbon into the right-hand
Ink ribbon holder
(supplied)
2 Remove the other spool.
part of the holder, while pressing in the arrow direction.
2 Fit the other spool into the left-
hand part of the holder.
Bar code
(Continued)
15
Operation