GB
STORAGE
·
To prevent possible explosion or ignition of
vaporized fuel, DO NOT store equipment
with fuel in tank or carburetor in enclosure
with open flame. (Example: Furnace or
water heater pilot light).
WARNING
JACOBSEN G PLEX II Series: ZV
SAFETY AND OPERATORS MANUAL
After each days use:
1.
Clean and inspect the cutting heads.
2.
Check engine oil and hydraulic oil levels. Fill
to proper level as required.
3.
Check for loose or missing hardware.
Tighten or replace as required.
NOTES
DAILY STORAGE
GB-19