Temperature Alarm - Gram Compact 210 Bedienungsanleitung

Temperature alarm

The controller is equipped with a temperature alarm, which constantly monitors the cabinet
temperature. The
The following alarms can be displayed:
AL low temperature alarm
AH high temperature alarm
Id open door alarm
Displaying alarm values:
Push the button, and keep pushed for 1 second. Push
displayed. Now, push
button to select the wanted value. Push
displayed.
Example – alarm AH:
9.0 the temperature alarm value is 8.0°C
dur alarm duration
h01 the alarm lasted for 1 hour ....(continues)
n15 .... and 15 minutes
AH selected alarm value
Each value is diplayed alternately for approx. 1 second.
To exit the alarm menu, push
"AH"). Push again, and the current cabinet temperature is displayed.
Deleting alarms:
Push , and keep pushed for 1 second. Push
push . Then push
the display fashes "- - - -" for 4 seconds. The alarms are now deleted, the
turned off, and the controller returns to temperature display.
lamp lights, if an alarm has occurred.
and one of the alarm codes above is displayed. Use the
and the selected alarm is displayed (in this example
or within 15 seconds and set "149". Push
or
again, and the alarm values are
or until "rLS" is displayed. Now
until "LS" is
or
again, and
-LED is
19