11.
Programming Options
of the Remote Control Transmitter
The transmitter offers a simple programming menu for the most important functions. You can operate it using the push
buttons to the right and left of the display (see figure 24).
The push buttons have the following functions:
Input button "L/R" (see also figure 1, item 7)
With this toggle switch you can change or switch the input value of a menu item.
"Enter" button (see also figure 1, item 8)
With this button you can activate the programming menu and store the changed settings.
"Exit" button (see also figure 1, item 10)
With this button you can exit the programming menu without saving the changed values.
Input button "UP/DN" (see also figure 1, item 11)
With this toggle switch you can switch the different menu items from top to bottom and vice versa.
The engine emits a short signal tone for each press of a button.
The selected menu item, the called up function or the settable value always flashes in the display.
Figure 24
77