C) Exponential Function (Aux) - Reely SKY Fireflame Pro Bedienungsanleitung

c) Exponential Function (AUX)

The exponential function, which can be switched on, can be used to change
the linear coupling between the controller and the servo path (dashed line
in the sketch in figure 28) in the central position nod, roll and tail control.
When the exponential function is activated, the nod, roll and tail servos
react with reduced motions in the central area of the controller (see con-
tinuous line in the sketch in figure 28). The maximum possible servo path
at full deflection of the control stick remains present, however.
The exponential function thus enables fine directional changes in hover
flight, with maximum model manoeuvrability being retained.
The exponential value is set ex works and cannot be changed. It affects
all three servos and all control directions.
Figure 28
82