Installation; Installing The Electrode Arm (Optional Fe30); Installing The Batteries (Fg3) - Mettler Toledo FiveGo FG3 Bedienungsanleitung

Installation

3. Installation
Carefully unpack the meter. Keep the calibration certificate in a safe place.
Insert the right adapter clip into the power adapter slot:
3.1

Installing the electrode arm (optional FE30)

The electrode arm can be fastened to FiveEasy™ on the left or the right side.
. Remove the electrode stand rubber cover on that side of the bench meter where you prefer the stand.
Keep the cover in a safe place;
2. Insert the electrode stand firmly into the opening as shown;
3. Fix the opening of the arm upon the stand from above, adjust it to a moderate height.
3.2

Installing the batteries (FG3)

4
Five_cond.indb 4
METTLER TOLEDO FiveEasy™ / FiveGo™ conductivity meter
Mini DIN
13.03.2007 16:07:41