Mettler Toledo FiveGo FG3 Bedienungsanleitung Seite 11

Keys for FE30
Keys for FG3
METTLER TOLEDO FiveEasy™ / FiveGo™ conductivity meter
Five_cond.indb 7
Press & release
- Start or endpoint measurement
- Confirm setting, store entered
value
- Start calibration
- Meter on
- Back to measurement screen
Exit
- Enter setup mode
- Increase value during setting
- Switch between conductivity,
TDS and salinity measuring
modes
- Decrease value during setting
- Start self-diagnosis
Press & release
- Start or endpoint measurement
- Confirm setting, store entered
value
- Start calibration
- Meter on
- Back to measurement screen
Exit
- Store current reading to memory
- Increase value during setting
- Scroll up through the memory
- Switch between conductivity,
TDS and salinity measuring
modes
- Decrease value during setting
- Scroll down through the memory
- Start self-diagnosis
Operating the conductivity meter
Press & hold
for 3 seconds
- Turn auto endpoint on / off
,
- Review the latest calibration
data
- Meter off
Press & hold
for 3 seconds
- Turn auto endpoint on / off
,
- Review the latest calibration
data
- Meter off
- Recall stored data
- Enter setup mode
13.03.2007 16:07:41
7