Fivego™ Clip (Fg3); Installing The Ip54 Cover (Fg3) - Mettler Toledo FiveGo FG3 Bedienungsanleitung

. Pull the fixing point of the battery cover in the direction of the arrow, hold the lid with two fingers and
remove it;
2. Insert the batteries in the battery compartment as shown;
3. Replace the battery cover.
3.3 FiveGo™ clip (FG3)
The FiveGo™ clip (Part no.5302960) is an electrode holder that can be placed next to the display on
either side of the housing. To mount the clip, remove the cover from the clip's fixing point. Attach the
clip by pressing it into the recess. Slide the shaft of the sensor into the clip from above.
3.4

Installing the IP54 cover (FG3)

Use the small plastic tool as shown:
1
4
METTLER TOLEDO FiveEasy™ / FiveGo™ conductivity meter
Five_cond.indb 5
2
5
3
6
Installation
5
13.03.2007 16:07:41