Safety Information - Renkforce MO900138DC Bedienungsanleitung

6. Safety information

The guarantee/warranty will expire if damage is incurred resulting from non-compliance with
these operating instructions. We do not assume any liability for consequential damage!
We do not assume any liability for property damage and personal injury caused by improper
use or non-compliance with the safety instructions. In such cases the guarantee/warranty will
expire!
Dear Customer: The following safety information is intended not only for the protection of the
device but also for the protection of your health. Please read the following items carefully:
• The device must be set up correctly. Observe the operating instructions for it.
• The product is a monitor for playing back the signals of compatible reversing cameras. It must
not be used for playing back films, etc.
• The device must only be used with the 12-24 V vehicle power supply (with the negative terminal
of the battery connected to the body of the vehicle). Never connect the device to a different
power supply.
• For safety reasons, any unauthorized conversions and/or modifications to the product are not
permitted.
• Do not expose the device to any extreme temperatures, dripping or splashing water, strong
vibrations or heavy mechanical stress.
• Check the device and the connection lines for damage from time to time. Do not use the device
anymore if it shows any damage. Disconnect the device from the power supply and take it to a
specialist workshop.
• Only operate the device in moderate climates, never in tropical climates.
• This product is not a toy and not suitable for children. Children do not understand how dange-
rous electrical devices can be.
• Do not leave packing material unattended. It may become a dangerous toy for children.
• Also observe the safety and operating instructions of all other devices connected to this de-
vice.
• Also observe the additional safety information in the individual sections of these operating
instructions.
• If you are not sure of the correct connection or if there are any questions that are not covered
by the operating instructions, do not hesitate to contact our technical support or another spe-
cialist.
19