Renkforce MO900138DC Bedienungsanleitung Seite 23

• Connect the combination plugs to the enclosed connection cable set with the connection line at the
monitor.
• Connect the combination plug connector CAM1 to the left side camera.
• Connect the combination plug connector CAM2 to the right side camera.
• Connect the combination plug connector CAM3 to the reversing camera.
• Connect the black GND cable to the vehicle ground.
• Connect the red DC 10-32 V cable to a connection that is live only with the ignition on.
Do not connect this terminal to continuous current; the car battery could be discharged when the
vehicle is parked for a longer period of time.
• Connect the brown REVERSE cable to a terminal that is live only when the reverse gear is engaged.
This line will switch the video input to the input CAM3 (signal of the reversing camera) automati-
cally when the reverse gear is engaged. It can be connected, e.g., to the line of a reversing light.
• Connect the white REVERSE L cable to the voltage supply of the left travel direction indicator.
This line will switch the video input to the input CAM1 (signal of the left side camera) automati-
cally when the left-hand direction indicator is activated. It can be connected, e.g., to the line of
the left direction indicator light.
• Connect the blue REVERSE R cable to the voltage supply of the right travel direction indicator.
This line will switch the video input to the input CAM2 (signal of the right side camera) automati-
cally when the right-hand direction indicator is activated. It can be connected, e.g., to the line of
the right direction indicator light.
23